Issue1478 Update TRV opening characteristic#1483
Conversation
There was a problem hiding this comment.
The change in the valve opening charcateristic results in a shift in time of the opening of the valves as visible in the picture below.
In the current formulation the valves will start closing when the T measured is equal to TSet-P/2. Therefore valSte.y and valDym.y is equal to 0.5 when the T measured is equal to the setpoint of 21°C.
There was a problem hiding this comment.
As expected the temperatures in the different zones are mainly higher compared to previous reference, due to the change in the opening of the TRVs considering the TSet at the center of the bandwidth (instead of at the upper bound).
|
Thanks a lot, @annadellisola, for addressing this issue! |
There was a problem hiding this comment.
The change in the valve opening leads to higher mass flow rates in the beginning and lower condenser temperature for the same outlet condenser heat. The temperatures in the zones are consistently higher around the TSet defined in the TRV, as shown in the figure below.
There was a problem hiding this comment.
Similar explanation given for DetailedHouse6 holds for this example.
2 participants
This PR closes issue #1478