New features (as of 27 June 2026)

• DroneAware support:
  • requires running DroneAware service (as of DroneAware release v1.4.0)
  • set DRONEAWARE_LOCAL_UDP_TARGETS=127.0.0.1:9999 in DroneAware environment settings
  • set DRONEAWARE_UDP_PORT=9999 in compose.yaml or compose-multifeed.yaml
• new default setting RESPECT_OGN_ADDRESS_TYPE=True
  • aircraft addresses indicated as non-ICAO will receive a "~" prefix for readsb to not merge them with a potential ICAO-address aircraft
  • if set to False, all OGN addresses are passed as if they were ICAO addresses; this mainly helps with SafeSky targets when an aprs_subscribe_filter is set; these are ALWAYS reported as OGN addresses, despite actually being valid ICAO addresses

docker version of ogn2readsb

consisting of the following components:

• ogn2dump1090
  • simple Python tool to inject Open Glider Network Traffic (from an existing local OGN decoder instance) into an existing readsb ADS-B decoder instance for display on a unified tar1090 map
  • furthermore online aggregated traffic from aprs.glidernet.org can optionally be injected for a reasonably selected radius around a given location
  • OGN traffic will be displayed as other traffic alongside ADS-B traffic, using the readsb tar1090 web interface (e.g. http://yourRaspberryPi.local/tar1090/)
• rtlsdr-ogn (feeding glidernet.org with OGN traffic)
• readsb (feeding glidernet.org with ADS-B traffic and decoding/forwarding traffic to the tar1090 map)
• mlat-client-adsbx (display MLAT traffic from adsbexchange.com)
• tar1090 (traffic map)
• optional feeds (advanced docker build):
  • adsbexchange.com
  • airplanes.live
  • adsb.lol
  • adsb.fi
  • planefinder.net
  • flightradar24.com
  • airnavradar.com
  • flightaware.com
  • opensky-network.org

supported operating systems

Debian or Debian-based Linux Operating Systems (64-bit Debian 13 Trixie or newer):

• Debian
• Ubuntu
• DietPi
• RaspiOS

---

supported hardware architectures

• arm64 (64-bit ARM CPUs with hardware floating point processor)
• x64 (64-bit AMD/Intel CPUs)
• SDRs: native support for RTL-SDR Blog v4 SDR since Debian 13 Trixie

prepare system and docker

• sudo apt update && sudo apt install --yes git wget
• bash <(wget -q -O - https://raw.githubusercontent.com/sdr-enthusiasts/docker-install/main/docker-install.sh)
• you may be asked Y/n a couple of times, it is safe to answer all of them with Y
• sudo reboot

prepare SDR_868_SERIAL and SDR_1090_SERIAL

• identify or set both SDR serials (e.g. 868 and 1090), they are required for the config.vars below
• unplug all SDRs, leaving only the SDR to be used for 868 MHz reception plugged in, then issue the following command:
  • docker run --rm -it --device /dev/bus/usb --entrypoint rtl_eeprom ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder -s 868
• unplug all SDRs, leaving only the SDR to be used for 1090 MHz reception plugged in, then issue the following command:
  • docker run --rm -it --device /dev/bus/usb --entrypoint rtl_eeprom ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder -s 1090

prepare SDR_868_PPM and SDR_1090_PPM

• unplug all SDRs, leaving only the SDR to be used for 868 MHz reception plugged in, then issue the following command:
  • docker run --rm -it --device /dev/bus/usb --entrypoint rtl_test ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder -p
  • let it run for 10-15 min (important so that the SDR warms up)
  • note the ppm listed in the related output, e.g. ... cumulative PPM: -1 and use that for SDR_868_PPM
  • modern SDRs have a TCXO, therefore SDR_868_PPM = 0 is the default
• unplug all SDRs, leaving only the SDR to be used for 1090 MHz reception plugged in, then issue the following command:
  • docker run --rm -it --device /dev/bus/usb --entrypoint rtl_test ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder -p
  • let it run for 10-15 min (important so that the SDR warms up)
  • note the ppm listed in the related output, e.g. ... cumulative PPM: -1 and use that for SDR_1090_PPM
  • modern SDRs have a TCXO, therefore SDR_1090_PPM = 0 is the default

prepare ogn2readsb

• git clone https://github.com/VirusPilot/docker-ogn2readsb

configuration

• cd ./docker-ogn2readsb
• nano config.vars
  • save changes with CTRL O
  • exit nano with CTRL X

variable	example	description
STATION_LAT	50.0	your station latitude [deg] (as positive or negative decimal number)
STATION_LON	10.0	your station longitude [deg] (as positive or negative decimal number)
STATION_ALT_MSL_M	300	your station altitude AMSL [m]
STATION_NAME	OGNTEST	your max. 9 letter station name, please comply with naming convention
STATION_COMMENT_ANTENNA	VINNANT CC868/8-PEL	optional information about your station antenna
STATION_COMMENT_FILTER		optional information about your station filter
STATION_COMMENT_AMPLIFIER	Uputronics HAB-FPA868	optional information about your station amplifier
STATION_COMMENT_DONGLE	rtl-sdr v3 silver	optional information about your station dongle
STATION_COMMENT_CLUB		optional name of your Flight Club
STATION_COMMENT_EMAIL		optional station email contact
STATION_COMMENT_WEBSITE		optional station website
STATION_COMMENT_NOTE		optional notes about your station
FREQ_PLAN	0	0=automatic (default), 1=EU/Africa, 2=USA/Canada, 3=South America/Australia, 4=New Zealand, 5=Israel, 6=EU/Africa 433MHz, 7=Japan
GSM_CENTER_FREQ	935.8	default = 0, change only if you know your closest GSM900 station frequency [MHz]
ADSB_MAX_ALT_FT	18000	ADSB max OGN feed altitude [ft]
METAR_SOURCE_ICAO	EDDF	4-letter ICAO code of a nearby airport with METAR service
APRS_SUBSCRIBE_FILTER	r/50.0/10.0/100	circle in [km] around a defined position (example: LAT 50.0, LON 10.0, CIRCLE 100 km) for which you want to receive traffic from the OGN APRS servers
SDR_868_SERIAL	868	enter your OGN SDR serial
SDR_868_PPM	0	change only if you know your SDR's ppm
SDR_868_BIAS_T_ENABLE	0	set to 1 to enable Bias Tee on your SDR, e.g. to power a LNA
SDR_1090_SERIAL	1090	enter your ADSB SDR serial
SDR_1090_PPM	0	change only if you know your SDR's ppm
SDR_1090_BIAS_T_ENABLE	0	set to 1 to enable Bias Tee on your SDR, e.g. to power a LNA

standard build (only feeding glidernet and adsbexchange.com)

• cd ./docker-ogn2readsb
• docker compose up -d

advanced build (with additional feeders)

• quite some manual editing is required, please use it only if you know what you are doing
• cd ./docker-ogn2readsb
• nano compose-multifeed.yaml
  • add your feeder credentials (e.g. SHARING KEY, USERNAME, LAT, LON, ALT)
  • delete (or comment out) unused/unwanted feeder entries
• docker compose --file compose-multifeed.yaml up -d

---

apply configuration changes

• cd ./docker-ogn2readsb
• nano config.vars
• docker compose up -d (or docker compose --file compose-multifeed.yaml up -d)

monitor all ADSB and OGN traffic consolidated in a single tar1090 instance

• http://yourReceiverIP.local/tar1090

enable DE and AT traffic patterns

• quick hack for now: enable "UK Radar Corridors":

monitor OGN details

• http://yourReceiverIP:8080
• http://yourReceiverIP:8081

monitor docker containers

• docker compose logs -f or docker compose --file compose-multifeed.yaml logs -f (monitor all containers)
• docker logs -f rtlsdr-ogn
• docker logs -f mlat-client-adsbx
• docker logs -f readsb
• docker logs -f ogn2dump1090
• docker logs -f tar1090

monitor docker statistics

• docker stats (CTRL C to exit)

open a shell inside your container

• docker exec -it <yourDockerContainer> bash

useful docker commands (examples for standard build)

• docker ps -a list all docker containers, including stopped ones
• docker container related commands
  • docker stop <container_name_or_id> stop a running container
  • docker rm <container_name_or_id> deactivate a stopped container
  • docker container prune remove all stopped containers
  • docker compose down stop and remove all containers and networks
  • docker compose up -d recreate and start containers
• docker image related commands
  • docker image ls list docker images
  • docker rmi <image_id_or_name> delete docker image
  • docker image prune delete all unused docker images
• docker system related commands
  • docker system prune clean your docker environment
• clean your entire docker environment e.g. for a fresh setup
  • docker rm -f $(docker ps -aq) force remove ALL containers
  • docker system prune -af --volumes clean your entire docker environment

docker terms and related meaning

Term	Meaning
Dockerfile	Build instructions
Image	Built / immutable system image
Container	Running instance of an image
Compose	Orchestration / startup plan for multiple containers