Basic implementation of the Accelerometer MC3565 interface to Arduino and python GUI that can receive and display the data in real time from Arduino board.
Make sure to connect evaluation board EV3635 of MC3635 in the following way:
Connection table:
| Name | Arduino Uno | MC3635 |
|---|---|---|
| SCLK | SCLK 13 | SCL 6 |
| MISO | MISO 12 | SDO 1 |
| MOSI | MOSI 11 | SDA 7 |
| CS | SS 10 | SCS 10 |
| POWER | 3.3V | DVDD 9 |
| GND | GND | GND 8 |
The following information is required:
- Board : contains Arduino modules and communication interface
- PC : Contains GUI and Communication wrapper that sends string messages to and from Arduino using COM interface.
-
Install python 3.10 from Python Release Python 3.10.0 | https://www.python.org
-
Create virtual environment. In Windows PowerShell:
python -m venv \Envs\pyqt
-
Activate virtual environment. In Windows CMD shell:
\Envs\pyqt\Scripts\activate.bat
-
Install serial and matplotlib:
pip install serial
pip install matplotlib
The code is based on the library provided by:
https://github.com/cphuangf/Accelerometer_MC3635
https://github.com/mcubemems/mCube_mc36xx_mcu_driver/tree/master
| Ver | Date | Who | Descr |
|---|---|---|---|
| 0201 | 01.09.24 | UD | Improved Accel |