Rx-Tx

This code is based on the wonderfull work of george7378.

Commands

Receive (This command must be done on the raspberry itself, not via SSH)

python ReceiveRF.py

Send COMMAND (see commands in code)

python TransmitRF.py YOUR_COMMAND

Send UP (Hardcoded key for work)

python up.py

Raspberry Pi 3 Wiring

WIRE	PIN	PIN	WIRE
Rx VCC (3.3V)	1	2	Tx VCC (5v)

•         | 3             | 4             | -
  

•         | 5             | 6             | Tx GND
  

•         | 7             | 8             | -
  

Rx GND | 9 | 10 | - Rx DATA | 11 | 12 | Rx DATA

•         | 13            | 14            | -
  

•         | 15            | 16            | -
  

•         | 17            | 18            | -
  

•         | 19            | 20            | -
  

•         | 21            | 22            | -
  

•         | 23            | 24            | -
  

•         | 25            | 26            | -
  

•         | 27            | 28            | -
  

•         | 29            | 30            | -
  

•         | 31            | 32            | -
  

•         | 33            | 34            | -
  

•         | 35            | 36            | -
  

•         | 37            | 38            | -
  

•         | 39            | 40            | -