NTP Server not listed in bootcodes

[DunklerPhoenix]

Heho
First of all: I'm sorry. I don't know where to write this issue.
The setup wizard says that the ntp server can changed under extras->bootcodes, but there is no option for changing that. Do I need to manuelly enter it oder is the option somewhere else?

Greetings
DP

piCorePlayer v10.0.0 | www v10.005 | linux 6.6.67-pcpCore-v8 (64) | piCore v15.0 | Squeezelite v2.0.0-1476-pCP

[paul-1]

You can set it during the initial config. Which should set the bootcode. The on the page Extras -> Bootcodes, the bootcode is ntpserver

[DunklerPhoenix]

Ah ok. So it isn't possible to change the NTP Server after the initially setup via Webinterface? Because on the bootcode site is nothing with ntp server visible

Edit:

[paul-1]

It should be. Send me a screenshot of your Bootcodes page.

…

Sent from my iPhone On May 6, 2025, at 12:56 PM, RogueThorn ***@***.***> wrote:  [https://avatars.githubusercontent.com/u/1261305?s=20&v=4]DunklerPhoenix left a comment (piCorePlayer/pCP-Kernels#14)<#14 (comment)> Ah ok. So it isn't possible to change the NTP Server after the initially setup via Webinterface? Because on the bootcode site is nothing with ntp server visible — Reply to this email directly, view it on GitHub<#14 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABRMN4PMN73M5BJCBEC5QHT25DSSBAVCNFSM6AAAAAB4RPQLE2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDQNJVGI4TEMJZGQ>. You are receiving this because you commented.Message ID: ***@***.***>

[DunklerPhoenix]

[paul-1]

I’m in a spot where I don’t have access to a machine to verify. But Go to the main menu, then select server in the bottom left corner of the page. Then go back to the bootcodes page. Is it there now? Sent from my iPhone On May 6, 2025, at 1:37 PM, RogueThorn ***@***.***> wrote:  [https://avatars.githubusercontent.com/u/1261305?s=20&v=4]DunklerPhoenix left a comment (piCorePlayer/pCP-Kernels#14)<#14 (comment)> Bildschirmfoto.vom.2025-05-06.18-58-39.png (view on web)<https://github.com/user-attachments/assets/80b9e3f4-332d-4d82-b562-8c9c433e49e9> — Reply to this email directly, view it on GitHub<#14 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABRMN4MXGJQWTDETAQS43BT25DXMHAVCNFSM6AAAAAB4RPQLE2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDQNJVGQYDGOJRGQ>. You are receiving this because you commented.Message ID: ***@***.***>

[DunklerPhoenix]

yes. If I select player/server it is visible

[dd900]

I have this exact problem. NTP is only available after selecting player/server. Changing it has no effect what so ever. I can confirm because I have two pCP players and one of them works as it should with the ntp bootcode being visible regardless of player-player/server being selected. Both of my pCPs are players only. I have an LMS server on another PC.