S-Series Support

[Magnitaizer]

I don't know where to better ask this question, sorry if using issues wrong.

Does 2nd Version Support S-Series Consoles? In 1st OSCWebMixer it was clearly mentioned.
Here I see that project looks like is using OSC for connecting to SD, although connection is mentioned as DiGiCo IPad.
So S-series support may be done and probably shouldn't be hard,right?

Please share me your thoughts on this,Very intersted in this awesome project!

[castles]

Version 2 doesn't currently support the S-Series console. It should be possible to get it working, however the OSC commands will need to be updated. Its probably a few hours work but I don't have access to an S-series console to test it. If you are keen to help out then we could work together to get it working.

[Magnitaizer]

Awesome!
On the next week we will get s21 console ,then i'll be able to collect and drop all commands from it's interface!

[bcotas]

I also have an s21 that I would love to use this with - let me know if I can be of any help.

[Magnitaizer]

I also have an s21 that I would love to use this with - let me know if I can be of any help.

If you already have a console,maybe you can drop all commands from OSC COMMANDS menu?

I couldn't find them on the internet and DiGiCo just sent me commands only for SD series

[castles]

Great, between us we should be able to get it to work. There were a few things I did differently with version 2 so hopefully there are matching commands on the S series consoles. In version 1 of webmixer the script sends this OSC command "/console/resend" which requests all the current values from the console. This can take some time so in version 2 I changed it so that we only request the information we care about. I believe the SD commands we need to translate are:

/Console/Input_Channels/ //total number of channels
/Aux_Outputs/([0-9]+)/Buss_Trim/name //aux name
/Console/Aux_Outputs/modes //aux modes (stereo or mono)
/Input_Channels/([0-9]+)/Channel_Input/name //channel name
/Input_Channels/([0-9]+)/Aux_Send/([0-9]+)/send_level //channel aux level
/Input_Channels/([0-9]+)/Aux_Send/([0-9]+)/send_pan //channel aux pan

It also captures snapshot information but we can ignore that to begin with.

[castles]

If one of you can download and run webmixer. Then in your browser set up the desk IP and port and check the "Show Messages in Console" checkbox. What this should do is allow you to view OSC messages that arrive. You should then be able to make changes on the console and see what the messages are in the console. Does this make sense?

[bcotas]

For sure, I'll be on site this weekend and will get you the list.

[bcotas]

Are these useful to you?

Message received over UDP: {"address":"/channel/30/total/gain","args":[-38]}
Message received over UDP: {"address":"/channel/30/fader","args":[-38]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-9.75]}
Message received over UDP: {"address":"/channel/30/fader","args":[-9.75]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-3.5625]}
Message received over UDP: {"address":"/channel/30/fader","args":[-3.5625]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-3.5]}
Message received over UDP: {"address":"/channel/30/fader","args":[-3.5]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-5.666666507720947]}
Message received over UDP: {"address":"/channel/30/fader","args":[-5.666666507720947]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-45.25]}
Message received over UDP: {"address":"/channel/30/fader","args":[-45.25]}
Message received over UDP: {"address":"/channel/30/total/gain","args":[-150]}
Message received over UDP: {"address":"/channel/30/fader","args":[-150]}
Message received over UDP: {"address":"/channel/30/mute","args":[false]}
Message received over UDP: {"address":"/channel/30/mute","args":[true]}
Message received over UDP: {"address":"/channel/120/total/gain","args":[-1.1875]}
Message received over UDP: {"address":"/channel/120/fader","args":[-1.1875]}
Message received over UDP: {"address":"/channel/120/total/gain","args":[-3.1875]}
Message received over UDP: {"address":"/channel/120/fader","args":[-3.1875]}
Message received over UDP: {"address":"/channel/120/total/gain","args":[-2.4375]}
Message received over UDP: {"address":"/channel/120/fader","args":[-2.4375]}
Message received over UDP: {"address":"/channel/120/total/gain","args":[-1.9375]}
Message received over UDP: {"address":"/channel/120/fader","args":[-1.9375]}
Message received over UDP: {"address":"/channel/1/mute","args":[false]}
Message received over UDP: {"address":"/channel/1/mute","args":[true]}

S-Series also has an OSC command list on the consoles - I can get some pictures of that too if that'll help.

[Magnitaizer]

I have got S21 now!
I will send right now only 1st command block that i'll be able to write now, later I will try to add everything to text format,so you'll be easier to make changes.

Send or recieve or both it is from S21 console perspective.

COMMANDS FROM OSC MENU IN DiGiCo S21

Snapshots

both int /digico/snapshots/fire
recieve - /digico/snapshots/fire/next
recieve - /digico/snapshots/fire/previous

Channel

both float(-40..40) /channel/{channel}/input/trim
both float(0..0.682) /channel/{channel}/input/delay/time
both bool /channel/{channel}/input/delay/enabled
both bool /channel/{channel}/input/digitube/enabled
both int /channel/{channel}/input/digitube/bias
both float(0.1..50) /channel/{channel}/input/digitube/drive
both float(-1..1) /channel/{channel}/input/width
both float(-1..1) /channel/{channel}/input/balance
both int /channel/{channel}/input/polarity
both bool /channel/{channel}/input/gain_tracking
both string /channel/{channel}/name
both float(-150..10) /channel/{channel}/fader
send float(-150..30) /channel/{channel}/total/gain
both float(-1..1) /channel/{channel}/pan
both bool /channel/{channel}/mute
both bool /channel/{channel}/solo

Aux Sends & Group Assign

both float(-90..10) /channel/{channel}/send/{send}/level
both bool /channel/{channel}/send/{send}/enabled
both float(-1..1) /channel/{channel}/send/{send}/pan

Console Query

recieve - /console/ping
send - /console/pong
send int /console/channel/counts
both - /console/resend

[castles]

Thanks guys. I haven't had any time to review this and see what we need to change. I will go over this over the weekend and see if I can work out what to do next.

[e20service]

Hi, i discover this software today! I have a
Digico s31 and i hope that this version 2 work with my moxer….is possible know if the update was maded? If you need any help i’m at disposal…thanks for your job

[castles]

I'm afraid I haven't done anything yet. For now you will need to use version 1

[e20service]

I hope that you can update this version too…..thanks

[spg1987-tech]

Is there any chance that you might have time to review this in the near future? I`m happy with the old one, but these new updates would be fantastic to get to use. And if you need a guy with a console I am ready to help. And I dont think i would be the only one that would pay some money if that is needed for you to get the time.