After installation, I just ran 'run_pim.sh', but getting issue…

[satanu01]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

[yin99]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Did you solve this problem? I also encountered a similar problem。

[satanu01]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Did you solve this problem? I also encountered a similar problem。

I have not faced this kind of problem. Are you using this in a virtual environment?

[yin99]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Did you solve this problem? I also encountered a similar problem。

I have not faced this kind of problem. Are you using this in a virtual environment?

yes, I run it in a virtual computer.Do you mean that this program can not run properly in a virtual computer?

[satanu01]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Did you solve this problem? I also encountered a similar problem。

I have not faced this kind of problem. Are you using this in a virtual environment?

yes, I run it in a virtual computer.Do you mean that this program can not run properly in a virtual computer?

Thank you so much… I tested today in a virtual environment on a different machine. It is working fine…
But I don't understand why I am getting Pin app terminated abnormally due to signal 11. error on my current machine?

[yin99]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Perhaps there is an unknown bug in the program.I added some info to track it. It's amazing that the same error occurred. But I can not solve this problem

[yin99]

~/MultiPIM/tests$ sh run_pim.sh
[H] Starting MultiPIM 2024-04-04 23:39:27, built 2024-04-04 23:19:52 (rev 1.0)
[H] Harness PID 6970
[H] Creating global segment, 2048 MBs
[H] Global segment shmid = 786484
[H] Deadlock detection ON
[H] Using env path /home/satanu/MultiPIM
[H] Pin cmd for process 0: 
/home/satanu/MultiPIM/pin/intel64/bin/pinbin -injection child -follow_execv -tool_exit_timeout 1 -ifeellucky -t /home/satanu/MultiPIM/build/opt/libzsim.so -config /home/satanu/MultiPIM/tests/pim16.cfg -procConfig /home/satanu/MultiPIM/tests/cmd.cfg -outputDir /home/satanu/MultiPIM/output -shmid 786484 -harnessPid 6970 -procIdx 0 -- /home/satanu/MultiPIM/tests/benchmarks/Polybench/linear-algebra/kernels/atax/atax 
[S 0] Started instance
[S 0] Started RR scheduler, quantum=100 phases
[S 0] Using env path /home/satanu/MultiPIM
[S 0] Paging mode: LongMode_Normal
[S 0] Cache prefix: sys.caches.l2.
[S 0] Cache prefix: sys.caches.l1i.
[S 0] Cache prefix: sys.caches.l1d.
Pin app terminated abnormally due to signal 11.
[H] Child 6971 done
[H] All children done, exiting

Pls help anyone, why I am getting this error "Pin app terminated abnormally due to signal 11."?

Did you solve this problem? I also encountered a similar problem。

I have not faced this kind of problem. Are you using this in a virtual environment?

yes, I run it in a virtual computer.Do you mean that this program can not run properly in a virtual computer?

Thank you so much… I tested today in a virtual environment on a different machine. It is working fine… But I don't understand why I am getting Pin app terminated abnormally due to signal 11. error on my current machine?

Hi, I would like to know the virtual environment that the code run successfully.
What OS did you use? ubuntu? And the version?
What version of the gcc did you use?
Did you change the code ?

[satanu01]

Sure, I am using WSL in Windows 11. In that WSL, I am using Ubuntu 18.04. The detail kernel version in below :
Linux sishu 5.15.146.1-microsoft-standard-WSL2 #1 SMP Thu Jan 11 04:09:03 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux
For gcc : gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
And No, I did not change anything in the code.