ESPHome example

[jcz1]

There is ESPHome example configuration:

bme68x_bsec2_i2c:
  address: 0x77
  model: bme688
  #operating_age: 28d
  #sample_rate: LP
  #supply_voltage: 3.3V

sensor:
  - platform: bme68x_bsec2
    temperature:
      name: "Temperature"
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20
    pressure:
      name: "Pressure"
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20
    humidity:
      name: "Humidity"
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20
    iaq:
      name: "IAQ"
      id: iaq
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20
    co2_equivalent:
      name: "CO2 Equivalent"
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20
    breath_voc_equivalent:
      name: "Breath VOC Equivalent"
      filters:
        - sliding_window_moving_average:
            window_size: 20
            send_every: 20

text_sensor:
  - platform: template
    name: "IAQ Classification"
    lambda: |-
      if ( int(id(iaq).state) <= 50) {
        return {"Excellent"};
      }
      else if (int(id(iaq).state) >= 51 && int(id(iaq).state) <= 100) {
        return {"Good"};
      }
      else if (int(id(iaq).state) >= 101 && int(id(iaq).state) <= 150) {
        return {"Lightly polluted"};
      }
      else if (int(id(iaq).state) >= 151 && int(id(iaq).state) <= 200) {
        return {"Moderately polluted"};
      }
      else if (int(id(iaq).state) >= 201 && int(id(iaq).state) <= 250) {
        return {"Heavily polluted"};
      }
      else if (int(id(iaq).state) >= 251 && int(id(iaq).state) <= 350) {
        return {"Severely polluted"};
      }
      else if (int(id(iaq).state) >= 351) {
        return {"Extremely polluted"};
      }
      else {
        return {"error"};
      }
  - platform: bme68x_bsec2
    iaq_accuracy:
      name: "IAQ Accuracy"

And for Laskakit Meteo Mini board you have to:

switch:
  - platform: gpio
    pin: GPIO3 
    id: my_output
    restore_mode: ALWAYS_ON