init.lua

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

-- Set to true if you have a Nerd Font installed and selected in the terminal
vim.g.have_nerd_font = true

-- [[ Setting options ]]
-- See `:help vim.o`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`

-- Make line numbers default
vim.o.number = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.o.mouse = 'a'

-- Don't show the mode, since it's already in the status line
vim.o.showmode = false

-- Sync clipboard between OS and Neovim.
--  Schedule the setting after `UiEnter` because it can increase startup-time.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.schedule(function() vim.o.clipboard = 'unnamedplus' end)

-- Enable break indent
vim.o.breakindent = true

-- Save undo history
vim.o.undofile = true

-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
vim.o.ignorecase = true
vim.o.smartcase = true

-- Keep signcolumn on by default
vim.o.signcolumn = 'yes'

-- Decrease update time
vim.o.updatetime = 250

-- Decrease mapped sequence wait time
vim.o.timeoutlen = 300

-- Configure how new splits should be opened
vim.o.splitright = true
vim.o.splitbelow = true

vim.o.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }

vim.opt.number = true
vim.opt.relativenumber = true

-- Preview substitutions live, as you type!
vim.o.inccommand = 'split'

-- Show which line your cursor is on
vim.o.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.o.scrolloff = 10

-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
-- instead raise a dialog asking if you wish to save the current file(s)
-- See `:help 'confirm'`
vim.o.confirm = true

vim.opt.expandtab = true
vim.opt.tabstop = 4
vim.opt.shiftwidth = 4
vim.opt.softtabstop = 4
vim.opt.smartindent = true

-- [[ Basic Keymaps ]]
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- swap lines
vim.keymap.set('v', "J", ":m '>+1<CR>gv=gv")
vim.keymap.set('v', "K", ":m '<-2<CR>gv=gv")

-- Diagnostic Config & Keymaps
-- See :help vim.diagnostic.Opts
vim.diagnostic.config {
  update_in_insert = false,
  severity_sort = true,
  float = { border = 'rounded', source = 'if_many' },
  underline = { severity = vim.diagnostic.severity.ERROR },

  -- Can switch between these as you prefer
  virtual_text = true, -- Text shows up at the end of the line
  virtual_lines = false, -- Teest shows up underneath the line, with virtual lines

  -- Auto open the float, so you can easily read the errors when jumping with `[d` and `]d`
  jump = { float = true },
}

vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- TIP: Disable arrow keys in normal mode
-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
-- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
-- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
-- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
-- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.hl.on_yank()`
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function() vim.hl.on_yank() end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not (vim.uv or vim.loop).fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
  if vim.v.shell_error ~= 0 then error('Error cloning lazy.nvim:\n' .. out) end
end

---@type vim.Option
local rtp = vim.opt.rtp
rtp:prepend(lazypath)

--  To check the current status of your plugins, run
--    :Lazy
--  You can press `?` in this menu for help. Use `:q` to close the window
--  To update plugins you can run
--    :Lazy update
require('lazy').setup("plugins")